Data and pilot combining for composite GNSS signal acquisition

With the advent of new global navigation satellite systems (GNSS), such as the European Galileo, the Chinese Compass and the modernized GPS, the presence of new modulations allows the use of special techniques specifically tailored to acquire and track the new signals. Of particular interest are the new composite GNSS signals that will consist of two different components, the data and pilot channels. Two strategies for the joint acquisition of the data and pilot components are compared. The first technique, noncoherent combining, is fromthe literature and it is used as a comparison term, whereas the analysis of the second one, coherent combining with sign recovery, represents the innovative contribution of this paper. Although the analysis is developed with respect to the Galileo E1 Open Service (OS) modulation, the obtained results are general and can be applied to other GNSS signals

Optical Module Front-End for a Neutrino Underwater Telescope: PMT interface

A proposal for a new system to capture signals in the Optical Module (OM) of an Underwater Neutrino Telescope is described. It concentrates on the problem of power consumption in relation to precision. In particular, a solution for the interface between the photomultiplier (PMT) and the front-end electronics is presented

Optimisation of bitumen emulsion properties for ballast stabilisation

: Ballasted track, while providing economical and practical advantages, is associated with high costs and material consumption due to frequent maintenance. More sustainable alternatives to conventional ballasted trackbeds should therefore aim at extending its durability, particularly considering ongoing increases in traffic speed and loads. In this regard, the authors have investigated a solution consisting of bitumen stabilised ballast (BSB), designed to be used for new trackbeds as well as in reinforcing existing ones. This study presents the idea behind the technology and then focuses on a specific part of its development: the optimisation of bitumen emulsion properties and dosage in relation to ballast field conditions. Results showed that overall bitumen stabilisation improved ballast resistance to permanent deformation by enhancing stiffness and damping properties. Scenarios with higher dosage of bitumen emulsion, higher viscosity, quicker setting behaviour, and harder base bitumen seem to represent the most desirable conditions to achieve enhanced in-field performanc

An “Unexpected” Rock Failure in a Limestone Open Pit Mine

On 28th October 2004 a rock failure occurred in a limestone open pit quarry in Tuscany (Italy). The phenomenon evolved slowly with the collapse of about 1000 cubic meters. The complex failure mechanism mainly involved plane sliding along stratifications with rotation and block toppling. The phenomenon continued to evolve slowly and on 3rd November failure extended to the neighbouring portion of rock with a total collapse of about 5000 cubic meters of rock. Failure analysis took advantage of an accurate characterization of geology, geometry and mechanical properties of the collapsed rock mass. Such analysis led to the conclusion that the failure has been caused by the concurrence of various factors, namely: - unfavourable dip and dip directions of stratification which daylight in the slope face; - possible reduction of the angle of shear resistance available along stratification especially as a consequence of intense rainfall and vibrations

Evaluating degree of compaction of levees using cone penetration testing

Permeability and strength parameters of compacted soils (i.e., levees as well as other earthworks) may be correlated to the degree of compaction. Since the use of conventional and recent testing methods for the assessment of density and water content of earthworks, under construction, cannot be applied to existing levees, an expeditious and accurate method for the assessment of the degree of compaction of existing and new levees, after their completion, appears extremely useful. The purpose of this research is to develop a simple tool for the assessment of the degree of compaction of "compacted", partially saturated, fine grained soils. This paper illustrates the proposed method which combines in situ testing such as electric CPT or CPTu with laboratory penetration testing performed with a mini-cone in a calibration chamber (CC). © 2018, Taiwan Geotechnical Society

3D FEM and DEM Analyses of Underground Openings in Competent Rock Masses

The paper is aimed at comparing the results of numerical analyses of underground openings in competent rock masses like the Carrara Marble (Italy) by considering a real and well documented case study. More specifically, 3D FEM and DEM analyses were carried out on a rock-mass model interested by two faults and three sets of discontinuities. The geometrical model is representative of deep underground openings where spalling-cracks and rock bursts can occur. PLAXIS 3D and 3DEC were used for the analyses. Intact rock and rock mass characterization of Carrara Marble was inferred from available technical literature. The analysis results were compared in terms of principal stresses and displacements in a number of monitoring points around the opening. The main practical interest is to find out a reliable approach for evaluating the stability of very large openings in a competent rock mass like Carrara marble. For such a purpose, a number of available in-situ stress measurements were used

Evaluation of the degree of compaction of levees by a CPT- based method

Permeability and strength parameters of compacted soils may be correlated to their degree of compaction. Unfortunately, the use of conventional and recent testing methods for the assessment of density and water content of earthworks under construction cannot be applied to existing levees. Therefore, the development of an expeditious and accurate method for the assessment of the degree of compaction of existing and new levees, after their completion, appears extremely useful. The purpose of this research is to develop a simple tool for the assessment of the degree of compaction of “compacted”, partially saturated, fine grained soils. The proposed method combines in situ testing like electric CPT or CPTu with laboratory penetration testing performed with a mini–cone in a calibration chamber

A practical approach to estimate the degree of binder activity of reclaimed asphalt materials

Using Reclaimed Asphalt (RA) in new asphalt mixtures can reduce the amount of new material required thereby saving money and natural resources. In addition, asphalt mixtures with RA have shown comparable properties and performance to that generally associated with asphalt mixtures made with 100% virgin material. However, RA content in pavement surface layers is still limited due to specification and technical limitations. For higher contents, the aged RA binder must be analysed to accurately determine the requirements for virgin binders and additives while the degree of blending (DOB) between the RA binder and the virgin binder also needs to be quantified. This is not a simple process and generally designers assume one of two opposing theories associated with 100% (full blending) or 0% (“Black Rock”) DOB. This paper proposes a new approach to estimate a unique property of the RA known as the Degree of Binder Activity (DoA) as a function of the processing temperatures of the RA. The study showed positive results and indicated that this DoA approach can be used as a tool to better understand RA in order to improve the binder/blend design for recycled asphalt mixtures